The measurement resolution is up to 0.03mm

Using a visible beam makes it easy to target the object under test

Light on and dark on can be set

The operating voltage range is large and can vary from 18V to 30V

With switching output and analog output

Alarm distance range can be set

Measuring range up to 4.5m, with a reflector plate up to 20m

Built-in double laser, effectively restrain the measurement deviation caused by the change of ambient temperature

The use of Class1 level visible laser beam, easy to aim at the measured object, direct eye does not hurt the eye

The sensitivity can be adjusted by 4 turns, and the regression reflection model can achieve 12 turns of sensitivity adjustment

Display type optional

Operating voltage range is large, can be in 10V...30V

Switching output normally open and normally closed mode can be freely switched

High stability of the sensor, long time operation is not affected

Often used for unmanned transport vehicle position detection

Often used for three-dimensional parking lot vehicle location detection

Automatic warehouse location detection

Position detection of various plates

Location detection of objects in various containers and small tanks

Small size red laser ranging

Easy to target with visible beam

Light on, dark on can be set

Operating voltage range from 18V to 30V

With switching output and analog output

Alarm distance range can be set

It can detect the accurate position of the vehicle and the object in the production line

Small-size infrared ranging

Easy to target with visible beam

Light on, dark on can be set

Operating voltage range from 18V to 30V

With switching output and analog output

Alarm distance range can be set

It can detect the accurate position of the vehicle and the object in the production line

Measuring range up to 25m

Use of red Class 1 laser beam is safe for human eyes

Supply voltage 18V 30V

Push-pull switch output and analog output can be configured

Various measurement modes can be set according to requirements

With transient protection, polarity reversal protection and output short circuit protection functions

Detection distance up to 65m

Easy to target with visible beam

Light on, dark on can be set

Operating voltage range from 18V...30V

With switching output and analog output

Alarm distance range can be set

Measuring range is wide, the distance from the surface of natural objects can reach 30m, plus the reflector can reach 150m

The use of visible laser beam, easy to aim at the measured object

Operating voltage range from 10V...30V

Programmable switching output and analog output

Alarm distance range can be set

Real-time display of the current measured distance value

Measurement value output unit can be set

Diversity of priming measurement methods

It can measure the position of all kinds of moving objects, especially on the track, such as cranes and rail conveyors

It can also measure the length, width, thickness and position of various plates, such as steel plate, medium plate, rubber plate, etc

Can measure various containers, large tanks in bulk solid, liquid, anticorrosive materials, the accurate position of radiation objects

It can measure the position and coil diameter of hot rolling line and cold rolling line

With cooling protective sleeve

Measuring range is wide, the distance from the surface of natural objects can reach 30m, plus the reflector can reach 150m

The use of visible laser beam, easy to aim at the measured object

Real-time display of the current measured distance value

Operating voltage range from 10V... 30V

Programmable switching output and analog output

Alarm distance range can be set

Can adapt to bad working environment

It can measure the position of all kinds of moving objects, especially on the track, such as cranes and rail conveyors

It can measure the length, width, thickness and position of various plates, such as steel plate, medium plate, rubber plate, etc

Can measure various containers, large tanks in bulk solid, liquid, anticorrosive materials, the accurate position of radiation objects

Natural Things Decent 0.1... 100m, up to 450m with reflectors

Measuring accuracy ±3mm / ±1mm

Using a visible laser beam, it is easy to aim the object under test

The operating voltage range is large and can vary from 10V to 30V

Switching quantity output and analog quantity output are programmable

Alarm distance range can be set

Optional output signal interface: RS232, RS422, SSI, Profibus, Profinet

Variety of startup measurement modes

The surface of natural objects can be up to 100m, and the reflector can be up to 450m

RS232，Profibus data interface

It can maintain high accuracy and reliability in extremely harsh industrial field environment

Operating voltage range from 10V to 30V, low power consumption (less than 1.5W at the lowest power consumption)

An additional reflector is used on the target object, measuring distances up to 450m and flexible installation

Class II safe visible laser beam is used for easy targeting of the object under test

You can modify sensor parameters and output measurement results on a PC or built-in monitor

The range of alarm distance can be set at will, and the positive and negative deviation of distance can be expressed by the output of switching quantity

The output unit of measurement can be arbitrarily set, including: m/decimeter/cm/ft/inch, etc

Rugged, compact housing, easy to install, protection standard IP65

The surface of natural objects can be up to 100m, and the reflector can be up to 450m

White surface accuracy up to ±2mm, natural surface ±3mm

RS232/ analog 4...20mA/ switching output

The working voltage range is large, which can be changed from 12V to 30V

Special protective cover, can adapt to harsh working environment

Class II safe visible laser beam is used for easy targeting of the object under test

Rugged, compact housing, easy to install, protection standard IP67

The surface of natural objects can be up to 100m, and the reflector can be up to 450m

White surface accuracy up to ±2mm, natural surface ±3mm

SSI output signal

The working voltage range is large, which can be changed from 12V to 30V

Special protective cover, can adapt to harsh working environment

Class II safe visible laser beam is used for easy targeting of the object under test

Rugged, compact housing, easy to install, protection standard IP67

Measuring range up to 300m, if the use of reflector, up to 3000m

The use of infrared laser beam, safe to the human eye

Suitable for red aiming laser, easy to aim at the measured object

Own heating device

Programmable switching output and analog output

Alarm distance range can be set

Can adapt to harsh outdoor environment

The output unit of the measured value can be set

Diversity of priming measurement methods